這個頁面上的內容需要較新版本的 Adobe Flash Player。

取得 Adobe Flash Player

 
3

• This tensioning gauge can be used to adjust the tension

   on the Cam belt where the movement of the timing

   belt is measured by load ( Nm ).

• Suitable for belts with various widths.

• Dual scales allows the measurements to be taken from

   either side of the tool .

 

Suitable for setting the camshaft in the timed position on

BMW M40/M43/M70/M73 petrol engines.

‧Anodized aluminium chocks suitable for locking camshaft pulleys on twin cam engines.
‧Set includes flywheel locking tools for selected PSA (Citroen/Peugeot) and GM (Vauxhall/Opel) petrol and diesel engines.

‧Allow the technician to hold the water pulley in place while loosening the radiator fan.

• Suitable for locking auxiliary drive belt pulleys as found

   on air conditioning pumps.

• Use in conjunction with spanner ir ratcget wrench.

‧Adjustable legs allow insertion of pegs into holes in camshaft pulleys.

‧An essential tool for many timing belt replacement applications. Used to counter-hold camshaft or injection pump sprockets during release of centre bolt.

Applications:

Adui: A6 1.6 (96 and newer) ALZ VW, Polo Classic, Golf,

Bora, New Beetle 1.6 (97) AEH/AKL/APF/AUR/AVU/AYD Golf,

Bora, New Beetle, 2.0 (98) AQY/APK, VW Engines: GAEB,

AVH, AZG, ALH, BDC

• Locking and setting tools for GM/Saab v6 petrol engines.

• Engine timing tools set for the General Motors/SAAB V6

   belt driven engine on 2.5/2.6/3.0

 

.1/2" Square Drive

.Star T50 (replaceable)

.Suitable for Renault vehicles.

Designed for te recommended removal and installation of elasticated or stretch drive belts fitted to modern auxiliary drive systems such as the alternator or power steering.

• A camshaft alignment tool set for Mercedes-Benz chain

   engine type 112.

• Includes right and left handed camshaft locking tools

   and a special wrench for the camshaft sprocket.

•Timing tool set for VAG 2.0 Liter TDI PD DOHC engines

  fitted to Audi A3/A4/A5/A6, Skoda Octavia II and

  Volkswagen Golf, Golf Plus, Jetta and Touran models.

•Includes two versions of Crankshaft Sprocket Locking

  Tool included.

•Type A for bored engines (T10050) and Type B for non-

  bored engines (T10100)

Spread legs of holding pin for easy installation (it will spread out when thumb knob tighten)

Useful on Audi V6, V8 and V10 engines

• Specifications :

- Jaw Spread Range : 40-220mm

- Pin Sizes Ø : 6, 8, 10, 16mm (2 of each)

Composed by 23pc of Camshaft Setting Plates

and one TDC Position Tool.

Kit includes camshaft tools, chain tensiioner retainer, locking pins and tensioner bolt.

Set contains the three specialised wrenches and pins required to access the timing belt tensioners fitted to a wide range of VAG petrol and diesel engines.

Applications:

FIAT Punto 1.7D/TD Tipo 1.9D/Ducato 1.9D/Tempra 1.9D

Tipo 1.9TD/Ducato 19TD Tempra 1.9TD diesel engines

with an adjustable camshaft timing belt pulley

• This universal tool can be used to hold the pulleys on

   Camshafts and Injection Pumps etc rotating when

   loosening the centre retaining bolt.

• Fits timing pulleys with a hole diameter of 16 mm

• Used when removing and refitting the single vanos

   unit on the inlet camshaft.

This comprehensive set of tools enables the correct

timing positions to be achieved on both camshaft

and crankshaft whilst replacing the timing belt or

chain on both petrol and diesel engines.

• This comprehensive set of tools enables the correct timing

   positions to be achieved on both camshaft and crankshaft

   whilst replacing the timing belt or chain on petrol engines.

• For use with BMW Mini One Mini Cooper and Mini S

 

Overall length: 725mm

Application:

BMW engine models M60 and M62

Applications:
BMW; 318 1.8 E36 S/Coupe (92-98), 318 1.8 ti E36 (94-98), 318 1.8 E36 S/Coupe (96-99), 318 1.8 E36 ti Compact (96-01), 320 2.0 E36 24V (91-97), 325 2.5 E36 24V (91-97), 520 2.0 E34 24V (89-96), 525 2.5 E34 24V (89-96), Z3 1.9 (96-99).

• Suitable for setting and locking camshafts on

   chain-driven BMW Vanos engines.

• Set includes set-up bracket, chain tensioner

   locking pin, secondary sprocket tool and

   primary chain tensioner tool.

Application:

VW Polo, Golf, Passat, T4 and Audi.

First Previous 1 / 2 / 3 / 4 / 5 Next Last
Home | Company | New Products | Catalogs | Inquiry | Contact
Address : NO. 558, Yongshun Rd., Nantun Dist., Taichung City 408, Taiwan (ROC)
P.O. Box : 47 - 176  TEL : 886-4-23810188  FAX : 886-4-23817108
Copyright © 2009 Ellient International Co., Ltd.  Designed by MINMAX

du lich

hay kham pha voi nhung chuong trinh tour

du lich phu quoc

va tham quan

du lich con dao

hay co the di den

du lich phu quoc

sau do vao mien trung de

du lich da nang

, nguoc ra bac trai nghiem chuong trinh

du lich ha noi

, tren duong di nho ghe ngang

du lich phong nha

kham pha hang dong ki vy hay

du lich mien tay

sau khi nghi ngoi co the di

du lich ha long

, roi xuoi vao nam

du lich nha trang

voi chuong trinh ke tiep di

du lich con dao

hay la ban co the chon

du lich phu quoc

, hoac xuat ngoai thuong ngoan ve dep khi

du lich campuchia

, ghe vung song nuoc miet vuon khi tham gia chuong trinh

du lich mien tay

ben canh do chung toi con co

noi that can tho

chuyen san xuat

noi that

voi cac san pham

tuong go phong thuy

va nhung

tuong go

bang go tu nhien Tuong thich ca bang go soi Tuong A di da phong thuy Tuong Quan am go huong Tuong Di lac hien dai Tuong Tam da dep Tuong Quan cong tinh te Tuong Khong minh doc dao Tuong Dat ma go huong Tuong Than tai go nu Tuong Ong tho go trac
search