這個頁面上的內容需要較新版本的 Adobe Flash Player。

取得 Adobe Flash Player

 
7

-Manufactured from heat resistant nylon.

To align clutch disc when replacing the assembly.

Weight: 0.294kg

Capacity: 200cc

Weight: 0.9kg

Capacity: 1.5L

Contents:
- 1 PC Vacuum pump (0~ -30 in Hg).
- 2 PCS 600mm connection hose.
- 1 PC 200ml fluid reservoir bottle.
- 2 PCS Fluid transfer and storage lids.
- 1 Set connection accessories rubber cupped adapters.
- 2 PCS 75mm accessory hoses.
- 2 PCS 95mm accessory hoses.

 

• This comprehensive set of piston rewind adaptors and force screw is essential when ervicing the brakes on a wide range of vehicles.

• For use with 'Push back' and 'Wind back' pistons the set

includes adaptors for Mazda, Toyota, General Motors, Audi,

Ford, Honda, Jaguar, Nissan, Saab, Subaru, VW, 

Alfa Romeo, BMW, Mercedes, Mitsubishi, Rover, Volvo and Renault.

• Set includes 12 adaptors and reaction plate. 2 pin fixed

Drive. Right hand threaded screw and T-bar.

 

Applications:

Alfa Romeo, Audi, BMW, Citroen, Fiat, Ford, GM, Honda, Jaguar, Lancia, Lincoln, Mazda, Mini,Mitsubishi, Nissan, Opel, Peugeot, Proton, Renault, Rover, Saab, Seat, Subaru, Toyota, Vauxhall,VW, Volvo

• Composite collection bottle with magnetic locating pad.

• Oversized bottle reduces overfilling.

• Supplied with tube and connectors.

  • 40pc brake rewind kit for use with left and right hand brake piston-caliper wind back kit.
  • Contents: 24 adaptors and caliper keys left and right threaded rewind tools 6mm and 7 mm hex keys, 3mm and 5mm pin punches, 4 special reaction plates sutible for: Alfa romeo; Audi; Austin; BMW; Citroen; Ford; GM; Honda; Jaguar; Mazda; Mercedes; Mitsubishi; Nissan/Opel/Renault; Rover; Saab; Subaru; Toyota; Volkswagen.

• Pneumatic rewind tool for left and right threaded piston.

• Suitable for most 3/8" drive wind-bark adaptors and

   pin type adaptors.

• Includes 15 pc of adaptors suit a wide range of vehicle

   applications.

• Fast, ligtweight and easy to use.

• Pneumatic rewind tool for left and right threaded piston.

• Suitable for most 3/8" drive wind-back adaptors and

   pin type adaptors.

• Suitable for brake calipers and transmission.

• Angled 90 degree.

• Overall length: 190mm

 

•Suitable for push-back and wind-back brake pistons.

•Includes left-handed and right-handed thrust bolt assemblies.

•Left-handed thrust bolt required for Ford, Citroen and Renault applications.

•Adaptor plates with thrust bolt assembly and reaction plate.

•Helps prevent damage to pistons and seals.

•Updated adaptor set suitablle for a wide variety of UK vehicles.

 

• This tool allows for quick and easy removal and installation

  of the handbrake cable by compressing the retaining spring.
• For compressing the retaining spring.
• Knurled grip handles.

• Fast, easy and effective bleeding of brakes and clutch

   using air from tyre.

• Innovative design incorporates valve for control of air

   pressure, extra-long air hose for use with larger vehicles

   and magnetic reservoir base to prevent accidental spillage.

• Aids quick removal of disc brake pads.
• Especially useful where brakes have bound
   and extraction by hand is difficult.
• Insert pins in pad and use mini slide hammer
   to ease pad from calliper.

• An essential tool for retracting the brake piston to

   allow insertion of new brake pads.
• Suitable for most ATE, Bendix, Delco and Girling callipers.
• Fitted with tommy bar but can be used with 1/2"drive

   ratchet wrench or spanner.
• Maximum Spread: 80mm.

 

Vacuum brake bleeder complete with 2 new fluid supply bottles (1 ltr), one is supplied with Adjustable Nozzle, another one is Fix Nozzle.

Specifications :

- Air supply : 90-120psi

- Air Consumption : 180ltr/min.

- Vacuum: 60 %

- Tank Capacity : 0.75 ltr.

- Inlet Size : 1/4 " BSP

Specifications:

- Air supply:90-120psi

- Air consumption : 180ltr/min.

- Vacuum: 60 %

- Tank Capacity : 1 ltr.

- Inlet Size : 1/4 BSP

‧Professional vacuum/pressure diagnostic tool helps

   identify a variety of faults on vehicle systems including

   fuel, ignition, transmission, emission and air

   conditioning/heating.

 

‧Set also includes reservoirs, hoses and adaptors for

   bleeding brake and clutch systems.

Set includes: Pressure Gauge 0-3000psi; 45° & 90° adapters;
                   11pc of Cylinder Adapters:
                   10x1.0/Concave; 10x1.0/Bubble;
                    3/8x24/Concave; 12x1.0/Bubble;
                   11x1.5/Bubble; 13x1.5/Bubble;
                   1/2x20/Concave;
                   9/16x20/Concave
                   1/16x24/Concave
                   9/16x8/Concave
                   10x1.25/Bubble

• Electrolytic tester.
• Integrated circuitry checks moisture content of fluid by
   measuring the electrical resistance and comparing it
   with acceptable limits.
• Easy calibration check using water.
• Three LED read-out.
• Just switch on and insert probe for immediate result.
• Red LED warns when battery is low and needs replacing.

• Adapters install directly into master cylinder line access

  holes.

• Measures pressure at front or back of master cylinder.

• Comes with complete line of adapters, gauge assembly,

  a complete instruction manual and vehicle look-up table.

• Ø57mm pressure gauge 0-3000 PSI and is accurate to

  4% of scale.

• Quick disconnect for easy connection.

• Complete adapter line with annual updates offered as

  needed.

• Gauge measures brake lining remaining on bonded pads

   in fractions from 1/16 to 5/8" in 1/32" graduations.

• Tool checks measurement without removing caliper.

• Measures drum wear to ensure within manufacturer’s

   tolerance.

• Also aids quick set-up of shoe/drum clearance prior

   to re-installation of drum.
• Measures drums from 165 to 292mm (6-1/2" to 11-1/2").
• Dual Imperial and Metric scale.
• Knurled locking action.

 

• Suitable for vehicles with discs all round.

• Restracts parking brake piston prior to in installation

   of new pads.

• Five possible pin configurations, fit US and European

   applications.

• Use with 3/8 drive ratchet wrench and extension bar.

• Originally designed as a tool to remove the tab-type

   retaining clip on American GM brake cylinder assembly.
• Suitable for removal and installation of locking rings on

   drive shafts when removing CVJ.
• Replaceable tips allow use on other circlip applications.

• Alloy body with steel clamp arm.

• Compact design allows use in confined spaces.

• Rounded jaw edges prevent damage to internal hose

   reinforcement.

• Suitable for use on fuel, vacuum and brake hoses.

First Previous 1 / 2 / 3 / 4 Next Last
Home | Company | New Products | Catalogs | Inquiry | Contact
Address : NO. 558, Yongshun Rd., Nantun Dist., Taichung City 408, Taiwan (ROC)
P.O. Box : 47 - 176  TEL : 886-4-23810188  FAX : 886-4-23817108
Copyright © 2009 Ellient International Co., Ltd.  Designed by MINMAX

du lich

hay kham pha voi nhung chuong trinh tour

du lich phu quoc

va tham quan

du lich con dao

hay co the di den

du lich phu quoc

sau do vao mien trung de

du lich da nang

, nguoc ra bac trai nghiem chuong trinh

du lich ha noi

, tren duong di nho ghe ngang

du lich phong nha

kham pha hang dong ki vy hay

du lich mien tay

sau khi nghi ngoi co the di

du lich ha long

, roi xuoi vao nam

du lich nha trang

voi chuong trinh ke tiep di

du lich con dao

hay la ban co the chon

du lich phu quoc

, hoac xuat ngoai thuong ngoan ve dep khi

du lich campuchia

, ghe vung song nuoc miet vuon khi tham gia chuong trinh

du lich mien tay

ben canh do chung toi con co

noi that can tho

chuyen san xuat

noi that

voi cac san pham

tuong go phong thuy

va nhung

tuong go

bang go tu nhien Tuong thich ca bang go soi Tuong A di da phong thuy Tuong Quan am go huong Tuong Di lac hien dai Tuong Tam da dep Tuong Quan cong tinh te Tuong Khong minh doc dao Tuong Dat ma go huong Tuong Than tai go nu Tuong Ong tho go trac
search