這個頁面上的內容需要較新版本的 Adobe Flash Player。

取得 Adobe Flash Player

 
Bearing, Axle, Bush, Hub Service Tools

• This tool is used to push new slientblock into the arm

   for VW and Fabia cars.

• hydraulic bearings, bearing bushes, ball bearings, shaft

   seals, rubber bearings, etc.

• Fully universal application. Ideal for different vehicles.

   Cars + HGVs.

• Depending on requirements, the particular sleeves

   can also be individually reworked (e.g. recess, etc.)

• Application also with workshop press + press frame.

• hydraulic bearings, bearing bushes, ball bearings, shaft

   seals, rubber bearings, etc.

• Fully universal application. Ideal for different vehicles.

   Cars + HGVs.

• Depending on requirements, the particular sleeves

   can also be individually reworked (e.g. recess, etc.)

• Application also with workshop press + press frame.

• Complimentary tool for use.

• Ideal for restricted access areas.

• Used with Impact wrench.

• Allows greater application of force.

‧ BMW(N51/N52) Exhaust Camshaft Upper & Lower

 Bearing Strip  Fixture Installation

‧ To locate upper & lower bearing strip when installing exhaust camshaft

• Designed for use on hydraulic braking systems.
• Adjusts the clearance between the brake drum and shoe.

 

• Tool removes and installs return spring on Bendix

  drum brakes.

• Simple push and twist action.

• Comprehensive kit of tools for the fast and effective

   removal and installation of wheel bearings, installing

   hub on most of vehicles.

CONTENTS:

- Beam, Separator 15-58mm,

- 2pc x Jaw 50mm,

- Thrust Screw,

- 2pc x Extension Rod 45mm

- 2pc x Extension 30mm

• Application: Vauxhall/Opel;
   Vectra (95-02)

 

• Drift Sizes Ø : 55.5, 59, 62, 65, 66, 71.5, 73,

   78, 84, 86, 91mm

• Hub Screws (3pc each) : M12×1.5, M14×1.5mm

  • Ductile steel electrodeposition finished body with thrust
    bolt and tommy bar.
  • Suitable for four and five stud hubs.
  • Use with a 1/2"drive ratchet wrench or with tommy bar supplied.

Contents: Driver Sizes Ø: Flat; 33, 38, 41, 43, 49, 52, 54, 61.5, 65, 69.5, 76, 82, 85mm,
Hooded; 62, 69.5, 88.5mm,
Driver Plate, Driver

• Set of nine aluminium bearing and seal drivers.

• Suitable for straight installation of bearing race

   without damage to the bearing race or axle housing.

• Fits most popular bearing race sizes.

.Special tool designed for use in-situ to remove & install

   press fit ball joints as used on BMW 3 series (E36)

.Used with spanner or ratchet wrench.

• Fine pitch thread with thrust bearing enables the

   rear bush to be removed from the front track

   control arm on VW Polo III/Skoda Fabia/Seat

   models.

• Free moving legs mounted on a floating plunger, enable

   quick and easy attachment to vehicle hubs.
• Heavy-duty hammer type handle allows
   the application of shock force for rapid
   removal of sticking hubs.

•  A versatile kit containing the
   5 leg hydraulic puller set and
   havey-duty force screw with
   hammer type handle

‧ Remove/Install rear sub-frame bushes in Modeo.

 

‧ Can be used in situ - no need to remove sub-frame

  from vehicle.

‧ Remove/Install front mounting bushers in Laguna

  rear sub-frame

‧ Can be used in situ - no need to remove sub-frame

  from vehicle.

• Hardened & tempered chrome vanadium steel.

• Suitalbe for the in-situ installation of the rear axle

   mounting bushes on selected VW and Audi vehicles.

• Use with ratchet wrench or spanner.

• Features a fine pitch thread and thrust bearing for use

   on the rear trailing arm bushes (33321097009) as

   fitted to BMW 3 series models - E36 E46 & E46

   Compact models.

• Tool kit for removing /installing upper and lower rear

   trailing arm bushes on GM Vectra.

• Bushes are easily pressed in or out with tool and a

   19mm ratchet wrench.

‧ For use on rear axle carrier bushes(33311091422)

  as used on BMW E39 5 series saloons.

‧ Features a fine pitch thread and thrust bearing to

  enable the rear subframe bushes to be removed/

  inserted-without removing the rear subframe assembly

  from the vehicle.

.For use in-situ to remove & install rear press fit ball

   joints as used on BMW 5 series (E39) and 7 series

   (E38) models - OEM # 33326767748.

.Used with ratchet wrench or spanner.

• For use on rear axle carrier bushes(33311094036)

   as used on BMW 5 series Touring models(E38/E39).

• For use on rear axle carrier bushes(33311093662)

   as used on BMW X5 series models.

Easily removes and installs gas-charged and oil-filled strut cartridges through the strut tower while it‘s still installed on the vehicle.

1. Includes strut retaining tool

2. Includes tools necessary for removing and installing gas charged or oil filled strut cartridges.

Application: FWD Buick: 1988 – 96 Regal; Chevrolet: 1990 – 00 Lumina Sedan, 1995 – 99 Monte Carlo; Oldsmobile: 1988 – 97 Cutlass Supreme; Pontiac: 1988 – 96 Grand Prix

• Suitable : VW/Audi, Seat, Ford, BMW, etc.

First Previous 1 / 2 / 3 / 4 Next Last
Home | Company | New Products | Catalogs | Inquiry | Contact
Address : NO. 558, Yongshun Rd., Nantun Dist., Taichung City 408, Taiwan (ROC)
P.O. Box : 47 - 176  TEL : 886-4-23810188  FAX : 886-4-23817108
Copyright © 2009 Ellient International Co., Ltd.  Designed by MINMAX

du lich

hay kham pha voi nhung chuong trinh tour

du lich phu quoc

va tham quan

du lich con dao

hay co the di den

du lich phu quoc

sau do vao mien trung de

du lich da nang

, nguoc ra bac trai nghiem chuong trinh

du lich ha noi

, tren duong di nho ghe ngang

du lich phong nha

kham pha hang dong ki vy hay

du lich mien tay

sau khi nghi ngoi co the di

du lich ha long

, roi xuoi vao nam

du lich nha trang

voi chuong trinh ke tiep di

du lich con dao

hay la ban co the chon

du lich phu quoc

, hoac xuat ngoai thuong ngoan ve dep khi

du lich campuchia

, ghe vung song nuoc miet vuon khi tham gia chuong trinh

du lich mien tay

ben canh do chung toi con co

noi that can tho

chuyen san xuat

noi that

voi cac san pham

tuong go phong thuy

va nhung

tuong go

bang go tu nhien Tuong thich ca bang go soi Tuong A di da phong thuy Tuong Quan am go huong Tuong Di lac hien dai Tuong Tam da dep Tuong Quan cong tinh te Tuong Khong minh doc dao Tuong Dat ma go huong Tuong Than tai go nu Tuong Ong tho go trac
search