這個頁面上的內容需要較新版本的 Adobe Flash Player。

取得 Adobe Flash Player

 
Steering, Transmission & Suspension
  • 3/8in.-drive square port in center screw
  • 1-5/16in. (33mm) opening
  • 2-1/2 in. (63mm) pull travel

This tool is essential for fixing CV boots.With a built in cutter and winding mechanism the banding can be tightened and cut quickly and effectively.

Designed to remove and install press-fit rear suspension

AT4046-01

- 3pce set: 10.5mm, 12.5mm, 14.5mm

 

AT4046-02

- 5pc Set: 10.5mm, 12.5mm, 14mm, 14.5mm(VW/Audi),

                14.5mm (Mercedes-W203/W209)

 

• Specifically designed for Mercedes-Benz W220/W211/W230.
• This tool removes and installs the lower ball joints whilst
   in-situ without removing parts.
• Tools are labelled for extraction and installation.

• Specially designed to fit four and five stud hubs, fitted to

   cars and light commercial vehicles.

• Unique design allows for the leg angle to
   change as the hub is being pulled.

• Force screw handle included

This tool eases the removal of the harmonic damper pulleys found on many Chrysler, Ford, GM, Hyundai, Mazda and Mitsubishi engines

• Remove/install rear sub-frame bushes on Ford Focus.

• Can be used in situ-no need to remove sub-frame

   from vehicle.

 

Applications:

Ford: Focus MK 1998 ~ 2004

• Remove and install inner tie rods without removing

   steering gear.

• The adapters fit into the tie rod socket, and a 1/2" drive

   ratchet or breaker bar fits the drive end.

• Services both old and new style inner tie rods.

Steering wheel yoke manufactured from drop-forged carbon steel.

• Designed for fast & efficient installation of uni-fit boots

   onto the CV joint.

• The metal tip of the cone is for placing in a vise.

• Apply lubricant to the cone, then stretch the boot to

   the end of the cone.

Contents:

  1pc - Reversible Ratchet

  7pc - 6 Point Sockets: 16, 17, 18, 19, 21, 22 & 24mm

10pc - 1/2'' Sq. Drive Extensions

           • 6mm, 7mm, 8mm

           • 5mm x 8mm, 6mm x 8mm, 7.1mm x 9.6mm

           • 7mm, 8mm, 9mm

           • T-50

           

• Work on harmonic balancers, steering wheel, cranjshaft

   pulleys and gears.

• Capable of handling almost every two or three-way bolt

   pull possible on almost every car, pickup, SUV, and small

   engine.

• Master Bolt Grip Set works on harmonic balancers, steering

   wheels, crankshaft pullers, and gears.

• CV Boot band pliers with 3/8" torque drive for

   Volkswagen/Audi/Vauxhall/Opel/Ford and others.
• For fitting stainless steel bands on drive shafts

   where a torque setting is specified.

• Two-leg puller, with two pairs of legs and two thrust caps.

 

• For use on Vauxhall/Opel and Ford vehicles.

AT4081-01: Jaw capacity: 23mm

 

AT4081-02: Jaw capacity: 28mm

 

AT4081-03: Jaw capacity: 34mm

‧Removes steering whells on most American and

   Japanese vehicles, with or without telescoping

   steering columns.

 

‧Also works as a regular 2/3-way puller to remove

   pulleys and small engine flywheels.

• Five sets of cap screws are included for various

   thread requirements.

 

• The forcing screw features a swivel end to protect s

   teering shaft.

 

• Capacity: 7 ltr

 

• Hose : 1500mm

‧Consists of one Pitman arm and four tie rod tools.

 

‧Used with 1/2" drive ratchet or breaker bar.

• This puller set suitable for steering wheel, sprockets,

   pulleys and shafts,etc,Range: Ø32 ~Ø90mm

• Suitable for the removal and installation of top shock

   retaining nut.

• Location pegs fit into slots cut in the retaining ring and

   allow hex key access through the centre for release/

   adjustment of the shock.

• Use with 22mm spanner.

• Removes and installs press-fit parts such as ball joints,

   universal joints, and truck brake anchor pins.

  • Easily removes stubborn heavy-duty U-joints on Dana and Rockwell driveshaft assemblies.

• A complete set of tools required to remove and install

   power steering pump pulleys of most American vehicles.

• Fits pulley hubs with diameters of 1-1/8", 1-1/4", 1-5/19"

   and 1-3/8". Includes the nessary adapters for servicing

   GM, Ford engines.

‧Unversal turnbuckle set for shock absorbers top fixing.

 

‧Includes: Turnbuckles, Sockets, Oblong bits, Hex bit,

   Flat bits, Spline bits and Star bits.

• Commercial vehicle ball joint extractor suitable for use
   on light trucks.
• Suitable for use on: BMW (E39), Mercedes-Benz W203 /
   W211 / W210 / W220 / W221 and various other models.
• Can also help with the removal of the Track Rod End Arm
   and light truck ball joints.

• Commercial Ball Joint Remover is useful on

   most trucks including Mercedes-Benz, Man etc.

First Previous 1 / 2 / 3 / 4 / 5 Next Last
Home | Company | New Products | Catalogs | Inquiry | Contact
Address : NO. 558, Yongshun Rd., Nantun Dist., Taichung City 408, Taiwan (ROC)
P.O. Box : 47 - 176  TEL : 886-4-23810188  FAX : 886-4-23817108
Copyright © 2009 Ellient International Co., Ltd.  Designed by MINMAX

du lich

hay kham pha voi nhung chuong trinh tour

du lich phu quoc

va tham quan

du lich con dao

hay co the di den

du lich phu quoc

sau do vao mien trung de

du lich da nang

, nguoc ra bac trai nghiem chuong trinh

du lich ha noi

, tren duong di nho ghe ngang

du lich phong nha

kham pha hang dong ki vy hay

du lich mien tay

sau khi nghi ngoi co the di

du lich ha long

, roi xuoi vao nam

du lich nha trang

voi chuong trinh ke tiep di

du lich con dao

hay la ban co the chon

du lich phu quoc

, hoac xuat ngoai thuong ngoan ve dep khi

du lich campuchia

, ghe vung song nuoc miet vuon khi tham gia chuong trinh

du lich mien tay

ben canh do chung toi con co

noi that can tho

chuyen san xuat

noi that

voi cac san pham

tuong go phong thuy

va nhung

tuong go

bang go tu nhien Tuong thich ca bang go soi Tuong A di da phong thuy Tuong Quan am go huong Tuong Di lac hien dai Tuong Tam da dep Tuong Quan cong tinh te Tuong Khong minh doc dao Tuong Dat ma go huong Tuong Than tai go nu Tuong Ong tho go trac
search