這個頁面上的內容需要較新版本的 Adobe Flash Player。

取得 Adobe Flash Player

 
Steering, Transmission & Suspension

• The bal joint can easily and quickly be pressed into and out

   of the lower wishbone.

• To remove/install the ball joint directly on the vehicle

   without to dismantle the wishbone.

1. Quickly removes the CV joint from the drive shaft without damaging the joint, and keeps hands free for releasing retaining circlip.

2. Reduces risk of damage to transmission.

3. Saves on labour time and suitable for vehicles

4. Main hole size for shaft threads:  Ø29mm (after 2014)

  • A specially designed tool for removing and installing the
    rear subframe on Ford Mondeo.

• For the operation of the upper shock absorberscrewing

   on MERCEDES-BENZ, type 211 T-model rear

   (E-class station wagon)

• For splitting track-rod end, anti-roll
   bar mountings, ball joints.
• Fits most models BMW, especially
   in confined space conditions like on BMW (E39).

• This tool was designed to instantly compress and hold

   MacPherson strut coil springs for strut work servicing.

• It has a universal fit, applying to all spring thicknesses.

• The U-bolts lock the spring into position, assuring a safe

   environment for operation.

• Sizes: 7 x 5mm, 8.2 x 5.5mm

• AT4224-01 - Opening: 18mm
• AT4224-02 - Opening: 23mm
• AT4224-03 - Opening: 29mm
• AT4224-04 - Opening: 40mm
• AT4224-05 - Opening: 46mm

Content:
- Pitman Arm/Tie Rod End Puller
- Ball Joint Separator
- Pitman Arm Puller
- Ball Joint/Tie Rod End Remover
- Tie Rod/Inner Bearing Race Puller

The removal and replacement of the silent bloc placed in
dir bracket is easily and  safely carried out directly
on the vehicle by using this extractor.

• Suitable for cars and light commercial vehicles, this unique
  design allows the tool to be used on a large range of ball
  joints, tie rods and suspension linkages.
• The jaws adjust from 18-42mm and are manufactured
  from Drop Forged Chrome Vanadium.

Used to replace the inner tie rod ends without replace the rack and pinion.

Capacity 33 - 42mm

Jaw Capacity: 35mm
Jaw Opening: 100mm

Designed for pulling drive shafts into hubs on Audi, BMW,
Fiat, Ford, Mercedes-Benz, Peugeot, Porsche, Renault,
Subaru, Vauxhall/Opel and Volvo

Jaw sizes: 30mm/34mm/40mm

• Includes:
- Hydraulic ball joint press frame
(OEM 31 1 441)
- 2pc Removal tools
( OEM 31 1 445/6)
- 2pc Installation tools
(OEM 31 1 447/8)

• For use in conjunction with Ellient Hydraulic Ball

  Joint Remover/Installer kit AT4276 .

• For use in conjunction with Ellient Hydraulic Ball
   Joint Remover/Installer kit AT4276 .

• For use in conjunction with Ellient Hydraulic Ball
   Joint Remover/Installer kit AT4276 .

• For use in conjunction with Ellient Hydraulic Ball
   Joint Remover/Installer kit AT4276 .

• For use in conjunction with Ellient Hydraulic Ball
   Joint Remover/Installer kit AT4276 .

• For use in conjunction with Ellient Hydraulic Ball
   Joint Remover/Installer kit AT4276 .

Suitable for removal and installation of spring and shock
strut from steering knuckle.

  • Innovative quick change and simple action for suitable fork.
  • Enable operator to select correct jaw size without taking entire extractor to the vehicle.
  • Adjustable opening angle
  • Jaw opening: 20, 22, 24, 27,30 mm
  • Thrust Screw Length: 100 mm
  • Pivot Rod Length: 125 mm
  • Professional ball joint separator with 4 position, adjustable lever.
  • Hardened & tempered drop-forged steel with chrome plated.
  • Lever adjustment in 24, 30, 40, 45 mm
  • Jaw opening: 20 mm
  • Total length: 165 mm

• AT4295-01
- Adaptor for Track-Rods Ø9~23mm.
• AT4295-02
- Adaptor for Track-Rods Ø40~55mm.

Used to spread the steering knuckle to enable the removal
and refitting of shock absorbers without the risk of damage

to the aluminium or cast iron knuckle.

Used to spread the steering knuckle to enable the removal and refitting of shock absorbers without the risk of damage to the aluminium or cast iron knuckle.

• Used for removing and installing the top shock

 retaining nut on S40, S60, S70, S80, S90 models.
• Includes holding socket and double-D
  axle center socket.

- 270mm & 370mm lead screws coil spring compressors plugs.

First Previous 1 / 2 / 3 / 4 / 5 Next Last
Home | Company | New Products | Catalogs | Inquiry | Contact
Address : NO. 558, Yongshun Rd., Nantun Dist., Taichung City 408, Taiwan (ROC)
P.O. Box : 47 - 176  TEL : 886-4-23810188  FAX : 886-4-23817108
Copyright © 2009 Ellient International Co., Ltd.  Designed by MINMAX

du lich

hay kham pha voi nhung chuong trinh tour

du lich phu quoc

va tham quan

du lich con dao

hay co the di den

du lich phu quoc

sau do vao mien trung de

du lich da nang

, nguoc ra bac trai nghiem chuong trinh

du lich ha noi

, tren duong di nho ghe ngang

du lich phong nha

kham pha hang dong ki vy hay

du lich mien tay

sau khi nghi ngoi co the di

du lich ha long

, roi xuoi vao nam

du lich nha trang

voi chuong trinh ke tiep di

du lich con dao

hay la ban co the chon

du lich phu quoc

, hoac xuat ngoai thuong ngoan ve dep khi

du lich campuchia

, ghe vung song nuoc miet vuon khi tham gia chuong trinh

du lich mien tay

ben canh do chung toi con co

noi that can tho

chuyen san xuat

noi that

voi cac san pham

tuong go phong thuy

va nhung

tuong go

bang go tu nhien Tuong thich ca bang go soi Tuong A di da phong thuy Tuong Quan am go huong Tuong Di lac hien dai Tuong Tam da dep Tuong Quan cong tinh te Tuong Khong minh doc dao Tuong Dat ma go huong Tuong Than tai go nu Tuong Ong tho go trac
search